การเตรียมและการหาลักษณะเฉพาะของผ้าไม่ทอจากพอลิแลคติกแอซิดและ พอลิบิวทิลีนซัคซิเนต ด้วยกระบวนการเมลต์โบลว์น

Main Article Content

ธนัญญา ชลปรีชา
พัชรี ประทุมพงษ์
หยาดนภา ผาเจริญ
นที ศรีสวัสดิ์
นรรจพร เรืองไพศาล
สุรเชษฐ์ ตุ้มมี
ชิราวุฒิ เพชรเย็น

บทคัดย่อ

งานวิจัยนี้มีวัตถุประสงค์เพื่อเตรียม และจำแนกลักษณะของผ้าไม่ทอจากพอลิแลคติกแอซิด และพอลิบิวทิลีนซัคซิเนต ซึ่งเป็น พอลิเมอร์ที่สามารถย่อยสลายได้แทนการใช้พอลิเมอร์สังเคราะห์ ด้วยกระบวนการเมลต์โบลว์นโดย ทำการปรับค่าพารามิเตอร์ในกระบวนการเมลต์โบลว์นเพื่อศึกษาลักษณะของผ้าไม่ทอที่พารามิเตอร์การขึ้นรูปแตกต่างกัน 6 สภาวะ ได้แก่ ความดันลม 0.2 และ 0.4 เมกะปาสคาล และระยะห่างจากหัวฉีดถึงตัวม้วนเก็บที่ 15 30 และ 45 เซนติเมตรตามลำดับ ผลจากการศึกษารูปร่างสัณฐานพบว่า การเพิ่มความดันลม และระยะห่างจากหัวฉีดถึงตัวม้วนเก็บส่งผลให้เส้นใยจากผ้าไม่ทอของพอลิเมอร์ทั้ง 2 ชนิดมีขนาดเล็กลง นอกจากนี้การทดสอบสมบัติทางกล ชี้ให้เห็นว่าความสามารถในการทนต่อแรงดึง และร้อยละการยืดตัว ณ จุดขาด มีแนวโน้มมากขึ้นเมื่อเพิ่มความดันลม เมื่อศึกษาสมบัติทางความร้อน พบว่าผ้าพอลิบิวทิลีนซัคซิเนตสามารถเกิดผลึกได้มากกว่าเมื่อเพิ่มระยะห่างของหัวฉีดกับตัวม้วนเก็บสอดคล้องกับโครงสร้างผลึกจากการวัดการเลี้ยวเบนของรังสีเอ็กซ์ จากการทดลองแสดงให้เห็นว่าพอลิแลคติกแอซิดสามารถขึ้นรูปเป็นผ้าไม่ทอได้สมบูรณ์ทุกสภาวะ ในขณะที่พอลิบิวทิลีนซัคซิเนตควรใช้ระยะห่างจากหัวฉีดถึงตัวม้วนเก็บมากกว่า 15 เซนติเมตรขึ้นไป อย่างไรก็ตามพอลิเมอร์ทั้ง 2 ชนิดสามารถขึ้นรูปเป็นผ้าไม่ทอได้ด้วยกระบวนการเมลต์โบลนและสามารถพัฒนาไปใช้สำหรับอุตสาหกรรมสิ่งทอต่อไปได้

Article Details

รูปแบบการอ้างอิง
ชลปรีชา ธ., ประทุมพงษ์ พ., ผาเจริญ ห., ศรีสวัสดิ์ น., เรืองไพศาล น., ตุ้มมี ส., & เพชรเย็น ช. (2026). การเตรียมและการหาลักษณะเฉพาะของผ้าไม่ทอจากพอลิแลคติกแอซิดและ พอลิบิวทิลีนซัคซิเนต ด้วยกระบวนการเมลต์โบลว์น. สักทอง : วารสารวิทยาศาสตร์และเทคโนโลยี (สทวท.), 10(2), 115–135. สืบค้น จาก https://li02.tci-thaijo.org/index.php/gts/article/view/1966
ประเภทบทความ
บทความวิจัย

เอกสารอ้างอิง

Bresee, R.R. & Qureshi, U.A. (2002). Fiber motion near the collector during melt blowing : part2-fly formation. International nonwovens journal, 11(3), 21-27.

Chae, H.G., Park, S.H., Kim, B.C. & Kim, D.K. (2004). Effect of methyl substitution of the ethylene unit on the physical properties of poly (butylene succinate). J. Polym. Sci. Part B Polym. Phys, 42, 1759-1766.

Chuayjuljit, S., Chaiwutthinan, P., Samutthong, S., Saravari, O. & Boonmahitthisud, A. (2014). Effects of Poly (butylene succinate) and Calcium Carbonate on the Physical Properties of Plasticized Poly(vinyl chloride). Journal of Metals, Materials and Minerals, 24(2), 15-21.

Chaiwutthinan, P., Pimpan, V., Chuayjuljit, S. & Leejarkpai, T. (2015). Biodegradable Plastics Prepared from Poly (lactic acid), Poly(butylene succinate) and Microcrystalline Cellulose Extractedfrom Waste-Cotton Fabric with a Chain Extender. Journal of Environmental Polymer Degradation, 23(1), 114-125.

Chen, G.Q. & Patel, M.K. (2012). Plastics derived from biological sources: present and future: A technical and environmental review. Chemical Reviews, 112, 2082-99.

Duran, K., Deniz, D., Gurkan, O. & Kevser, K. (2013). Investigation of the physical properties of melt blown nonwovens for air filtration. Journal of textile & apparel, 23(2), 136-142.

Elwathig, H., Salah, E., You, W. & Muhuo, Y. (2017). Biodegradable poly (lactic acid)/poly (butylene succinate) fibers with high elongation for health care products. Textile Research Journal, 88(15), 1735-1744.

Hu, X., Su, T., Pan, W., Li, P. & Wang, Z. (2017). Difference in solid-state properties and enzymatic degradation of three kinds of poly (butylene succinate)/cellulose blends. RSC Adv, 7, 35496-35503.

Jompang, L., Supaphorn, T., Jessada, W., Prayoon, S., Chiyaprek, A., Tirapong, C., Narin, K., Narongchai, O. & Narongchai, O. (2013). Poly (lactic acid) and poly (butylene succinate) blend fibers prepared by melt spinning technique. Energy Procedia, 34(5), 493-499.

Kathryn, C.D. (2013). Overview and analysis of the meltblown process and parameters. Journal of textile & apparel, Technology and management, 6(1), 1-21.

Nor, F.Z. & Mariatti, J. (2020) A review on degradation mechanisms of polylactic acid: hydrolytic photodegradative microbial and enzymatic degradation. Polymer engineering and science, 60, 2061-2075.

Peng, M., Jia, H. & Jiang, L. (2019). Study on structure and property of PP/TPU meltblown nonwovens. Journal Text Inst, 110, 468-475.

Puchalski, M., Siwek, P., Panayotov, N., Berova, M., Kowalska, S. & Krucnska, I. (2019) Influence of various climatic conditions on the structural changes of semicrystalline pla spun-bonded mulching nonwovens during outdoor composting. Polymers, 11, 559.

Shen, S., Rodion, K., Sengul, T. & Stephan, K. (2013). Polylactide (PLA) and its blends with poly(butylene succinate) (PBS): a brief review. Journal Polymers (Basel), 11(7), 1193.

Tsuji, H. (2005). Poly (lactide) stereocomplexes : Formation, structure, properties, degradation, and applications. Macromol. Biosci, 5, 569-597.

Yahya, K. & Olos, M. (2021). Revealing of process-stucture-property relationships of fine polypropylene fiber mats generated via melt blowing. Polymers Advanced Technologies, 10(32), 5270.

Yang, J., Pan, P., Hua, L., Xie, Y., Dong, T., Zhu, B., Inoue, Y. & Feng, X. (2011). Fractionated crystallization, polymorphic crystalline structure, and spherulite morphology of poly (butylene adipate) in its miscible blend with poly (butylene succinate). Polymer, 52, 3460.3468.

Yalcin Y. (2015). Effect of air quenching on characteristics of thermoplastic polyurethane meltblown nonwoven. Journal textile and apparel, 25(3), 236-245.