Adhesive, Adhesion Mechanism, Composition of Adhesive, Adhesive Fillers, Classification of Adhesives and Epoxy Resin

กาว กลไกการยึดติด องค์ประกอบของกาว สารเติมแต่งกาว การแบ่งประเภทกาวและอีพอกซีเรซิน

Authors

  • Nathakamolwan Srijunpetch Chemistry Department, Faculty of Science and Technology, Valaya Alongkorn Rajabhat University under the Royal patronage, Pathum Thani Province

Keywords:

Adhesive, Additives for Adhesive, Classification of Adhesive, Epoxy Resin

Abstract

          Adhesive is an important material used to bond different substrates for instance, wood, elastomers, textiles, plastics and metals. It is utilized in structural, electronics, automotive, aircraft, packaging, shoes and other industries. Adhesive for different work requires dissimilar properties. Adhesive can be formulated from various polymers, producing variety properties for example, adhesive made from rubber, epoxy resin and acrylic. Some adhesive must last as long as the products.  Adhesive related theories, the bonding mechanism of the adhesive to the substrate, composition of the adhesive, additives for adhesives, silane adhesion promoter, hot-melt adhesives, pressure-sensitive adhesives, solvent-based adhesives, water-based adhesives, hybrid adhesive, classification of adhesives, epoxy resin and the way to develop adhesives will be discussed in this article.

Downloads

Download data is not yet available.

References

Müller, B, Rath, W. Formulating Adhesive and Sealants: Chemistry, Physics and Applications. Vincentz Network GmbH & Co KG; 2010

Edward MP. Handbook of Adhesives and Sealants. The McGraw-Hill Companies, Inc; 2000

Chen X, Zhong H, Jia L. Polyamides derived from piperazine and used for hot-melt adhesives: synthesis and properties. Int J Adhes Adhes 2002;22:75–9

Orgilés-Calpena E, Arán-Aís F, Torró-Palau AM, Orgilés-Barceló C. Novel polyurethane reactive hot melt adhesives based on polycarbonate polyols derived from CO2 for the footwear industry. Int J Adhes Adhes 2016;70:218–24

Yu Q, Yang W, Wang Q. Functionalization of cellulose nanocrystals with γ-MPS and its effect on the adhesive behavior of acrylic pressure sensitive adhesives. Carbohydr Polym 2019;217:168–77

Ho KY, Dodou K. Rheological studies on pressure-sensitive silicone

adhesives and drug-in adhesive layers as a means to characterise adhesive performance. Int J Pharm 2007;333:24–33

Czech Z, Petech R. Thermal decomposition of polyurethane pressure-sensitive adhesives dispersions. Prog Org Coat 2010;67:72–5

Pan L, Ding W, Ma W. Galvanic corrosion protection and durability of polyaniline reinforced epoxy adhesive for bond-riveted joints in AA5083/Cf/Epoxy laminates. Mater Des 2018;160:1106–16

Baek SS, Jang SH, Hwang SH. Construction and adhesion performance of biomass tetrahydro-geraniol-based sustainable/transparent pressure sensitive adhesives. J Ind Eng Chem 2017;53:429–34

Canetta E, Adya AK. Atomic force microscopic investigation of commercial pressure sensitive adhesives for forensic analysis. Forensic Sci Int 2011; 210:16–25

Baek SS, Hwang SH. Preparation and adhesion performance of transparent acrylic pressure sensitive adhesives containing menthyl acrylate. Polym Bull 2016;73:687–701

Mapari S, Mestry S, Mhaske ST. Developments in pressure-sensitive adhesive: A review. Polym Bull 2021;78: 4075-108

Brazel CS, Rosen SL. Fundamental Principles of Polymeric Materials. (3rd ed). John Wiley & Sons; 2012.

Li W, Bouzidi L, Narine SS. Current Research and Development Status and Prospect of Hot-Melt Adhesives: A Review. Ind Eng Chem Res 2008; 47:7524–32

Dahmane H. Development of Environmentally Friendly Warm-Melt Adhesives for the Packaging Industry. Int J Adhes Adhes 1996;16:43–5

Stolt M, Viljanmaa M, Södergård A, Törmälä P. Blends of Poly(-caprolactone-b-lactic acid) and Poly-(lactic acid) for Hot-Melt Applications. J Appl Polym Sci 2004;91:196-204

Park YJ, Joo HS, Kim HJ, Lee YK. Adhesion and Rheological Properties of EVA-Based Hot-Melt Adhesives. Int J Adhes Adhes 2006;26: 571–76

OBrien EP, Ward TC. Interfacial Diffusion of Fluids in Pressure Sensitive Adhesives. J ASTM Int 2005;2:489-96

Viljanmaa M, Sodergard A, Tormala P. Adhesion Properties of Lactic Acid Based Hot Melt Adhesives and Their Storage Stability in Different Packaging Applications. Int J Adhes Adhes;22:447–57

Dwivedi R, Rastogi R. Epoxy resins and their curing agents: A review. Paint india 2018;53-60.

Downloads

Published

01-07-2025

How to Cite

1.
Srijunpetch N. Adhesive, Adhesion Mechanism, Composition of Adhesive, Adhesive Fillers, Classification of Adhesives and Epoxy Resin: กาว กลไกการยึดติด องค์ประกอบของกาว สารเติมแต่งกาว การแบ่งประเภทกาวและอีพอกซีเรซิน. AdvSciJ [internet]. 2025 Jul. 1 [cited 2025 Jul. 2];25(2):1-28. available from: https://li02.tci-thaijo.org/index.php/adscij/article/view/878

Issue

Section

Academic Article